Grinders & Surface Prep

Walk-behind concrete grinders, a gas planer, a floor stripper and a dust vacuum for taking a slab down, stripping coatings and pulling up old flooring before epoxy, tile or new floors go in.

  • Owner-operated since 2002
  • Open 7 days a week
  • Delivery & pickup available
  • Fuel billed at cost

How to choose a concrete grinder or surface prep machine

Smoothing and thin coating removal

The EDCO Turbo-Lite TL-9 grinds a 9 in path at roughly 350 to 400 sq ft per hour at 1/32 in, weighs 94 lb and runs on a standard 115V/15A circuit with a 50 ft cord. The single-disc grinder is heavier (188 lb) and comes with its own vacuum. Both are for high spots, trowel marks, glue and thin paint, not thick buildup.

Thick coatings and leveling

The gas CPM-8G Crete Planer cuts the surface instead of polishing it: 8 in wide, about 1/8 in per pass, 350 to 500 sq ft per hour, and 800 to 1,000 ft of traffic line per hour. It weighs 206 lb and is for outdoor or well-ventilated work.

Removing old flooring

The TS-8 Tile Shark oscillates a blade under ceramic and vinyl tile, sheet vinyl, linoleum and glued carpet at up to 200 sq ft per hour on soft material. Follow it with the TL-9 to grind off the thinset or glue left behind.

Dust control

The EDCO industrial vacuum (120V, 9 gallon, 99 lb) connects to the grinders' 2 in ports. Plan on it for any indoor grinding; a shop vac will not handle fine concrete dust.

Questions about renting grinders & surface prep

Which grinder do I need to prep for epoxy or tile?

For knocking down high spots and taking off glue or thin paint, the TL-9 or the single-disc grinder. If the coating is thick or you need to level a joint or trip hazard, rent the CPM-8G planer instead and finish with a grinder.

Can I grind indoors?

Yes with the electric TL-9, single-disc grinder and Tile Shark; connect the EDCO industrial vacuum and wear a respirator, because concrete dust contains silica. The CPM-8G is gas and stays outdoors or in a well-ventilated space.

What tooling comes with the grinder?

The TL-9 goes out with three 30-grit Magna-Trap Double Dyma-Dots. For the single-disc grinder, tell us what you are grinding so the right disc goes with it.

Could the old flooring contain asbestos?

Older tile, sheet flooring and adhesives can. If you are not sure what is under the floor, have it tested before running the Tile Shark or a grinder on it.

How long is the rental period?

Everything here rents by 1 to 4 hours, 4.5 to 24 hours, 1 week or 4 weeks, and you pay for the time it is out, not how much you use it. Delivery for this equipment is $85 round trip within 45 minutes of Hamburg, $125 for 46 to 75 minutes.

Ready to rent?

Request online and we will confirm availability and delivery, or call or text 810-231-7368.