Telehandler Accessories

Attachments that mount on our SkyTrak telehandlers: a 15 ft truss boom and an adjustable jib for hung loads, and a work platform for lifting a crew. Each rents alongside one of our telehandlers.

  • Owner-operated since 2002
  • Open 7 days a week
  • Delivery & pickup available
  • Fuel billed at cost

How to choose a telehandler attachment

Truss boom for reach over a wall

The 15 ft truss boom puts a hook 15 ft past the carriage, so a 6042 or 8042 can set roof trusses and long lumber or steel over the sidewall of a pole barn. The listing rates it at 2,000 lb, and the telehandler's own capacity drops with the boom out, so plan the lift from the load chart and use tag lines.

Jib boom for loads that have to hang

The adjustable jib extends 7 to 12 ft and lowers beams, pipe, septic tanks and precast from a hook instead of balancing them on forks. The listing rates it at 6,000 lb; the rating on the attachment's data plate and the telehandler load chart govern what you can actually lift at a given reach. Use rated rigging and keep people out from under the load.

Work platform for a crew up high

The platform (listed at 1,000 lb and up to 4 people) lifts workers and tools to eaves, soffit and framing when the telehandler is already on site. Everyone on it must wear fall protection tied off to the platform. For a full day of elevated work a boom lift such as the Haulotte 45XA is easier to position; see the lift guide.

Questions about renting telehandler accessories

Can I rent an attachment without a telehandler?

These attachments rent alongside one of our telehandlers. If you plan to run one on your own machine, call 810-231-7368 first so we can check the fit and the rating before you book.

Does the telehandler lift less with an attachment on?

Yes. The truss boom and jib move the load farther from the machine, and the work platform adds 575 lb before anyone steps on. Plan every lift from the load chart in the cab and treat the attachment's own rating as a ceiling, not a target.

Do we need harnesses on the work platform?

Yes. Anyone on the platform must use fall protection tied off to the platform, and both the platform rating and the telehandler load chart apply.

Can the jib or truss boom set a septic tank or a steel beam?

That is what they are for. The jib (7 to 12 ft) hangs the load from a hook and lowers it into place; the truss boom reaches 15 ft out to set trusses and long material over walls. How much you can lift depends on how far out the boom is, so check the load chart for that reach before you rig.

Ready to rent?

Request online and we will confirm availability and delivery, or call or text 810-231-7368.