Saws & Hammers

Gas concrete saws for cured slabs and for same-day control joints, plus Hilti electric breakers and rotary hammers for demolition and drilling in concrete, block and brick.

  • Owner-operated since 2002
  • Open 7 days a week
  • Delivery & pickup available
  • Fuel billed at cost

How to choose a concrete saw, breaker or rotary hammer

Handheld or walk-behind saw

The STIHL TS420 (14 in wheel, 4.9 in max depth, 21.5 lb, gas) cuts pavers, block, brick and openings in walls, plus steel with the right wheel. The EDCO 18 in walk-behind saw (13 HP gas, 6.75 in max depth, water-cooled) is for long straight cuts: removing a driveway section, trenching a garage floor, or sawing joints in a cured slab.

Early-entry saw for fresh concrete

The Diamond Products CC150XL-EE cuts control joints up to 1-1/2 in deep the day of the pour, typically from about two hours after finishing until final set. At about 100 lb with a 4.8 HP Honda and a 6-1/2 in blade it is light and quick, but it is not for cured concrete; that is the 18 in saw's job.

Breaker or rotary hammer

The Hilti TE 3000-AVR is a 59.7 lb electric floor breaker (62.7 ft-lb per blow, 858 blows per minute) that plugs into a standard outlet or generator, for slabs, footings and steps. The Hilti TE 70-ATC/AVR is a 22 lb SDS Max rotary hammer that drills 15/32 to 5-29/32 in holes and chisels tile, mortar and small patches. The smaller Rotary Hammer covers anchor holes and light chipping when you do not need the TE 70.

Questions about renting saws & hammers

When do I cut control joints?

In fresh concrete, the same day you pour: the CC150XL-EE early-entry saw starts roughly two hours after finishing and must be done before final set. In a slab that has already cured, cut joints with the 18 in walk-behind saw.

Do the saws need water?

The 18 in walk-behind saw uses water to cool the blade and control dust, so bring a garden hose. The STIHL TS420 has a water connection; cutting wet reduces dust and keeps the blade cool. The early-entry saw cuts green concrete with its own skid plate and does not use a hose.

Which blade will I get?

Tell us whether you are cutting concrete, asphalt, pavers or steel when you book and the saw goes out with the matching blade. Early-entry blades are sized for that saw; ask about blade wear at pickup, and call or text 810-231-7368 if a blade wears out mid-job.

Do the Hilti hammers need a compressor?

No. The TE 3000-AVR breaker and both rotary hammers are corded electric and run from a standard outlet or a generator. Tell us your hole size so the right bit or chisel goes with the tool.

How long can I keep a saw or hammer?

All items here rent by 1 to 4 hours, 4.5 to 24 hours, 1 week or 4 weeks, billed for time out rather than run time. Delivery is $85 round trip within 45 minutes of the Hamburg yard, $125 for 46 to 75 minutes, or pick up at 6472 E M-36.

Ready to rent?

Request online and we will confirm availability and delivery, or call or text 810-231-7368.