Concrete & Masonry

Saws, breakers, grinders, a planer, a mixer and power buggies for concrete, block, brick and paver work: cutting slabs and control joints, prepping floors for coatings, breaking out old concrete, and mixing and moving fresh mud.

  • Owner-operated since 2002
  • Open 7 days a week
  • Delivery & pickup available
  • Fuel billed at cost

Grinders, planer & surface prep

All Grinders & Surface Prep →

Concrete mixer & power buggies

All Mixers & Buggies →

Concrete saws, breakers & rotary hammers

All Saws & Hammers →

Tile, brick & paver saws

All Tile & Brick Saws →

How to choose concrete and masonry equipment

Cutting cured concrete or asphalt

The STIHL TS420 handheld saw (14 in wheel, 4.9 in max depth, 21.5 lb) is for pavers, block, wall openings and cuts a cart cannot reach. For long straight cuts through a driveway, garage floor or asphalt patch, the EDCO 18 in walk-behind saw (13 HP gas) cuts up to 6.75 in deep with water on the blade. Neither is for fresh concrete.

Control joints in a new pour

The Diamond Products CC150XL-EE early-entry saw cuts joints up to 1-1/2 in deep within hours of finishing, typically starting about two hours after the finish and before final set, so the slab cracks at the joint instead of at random. It is a 100 lb, 4.8 HP Honda saw with a 6-1/2 in blade; once the slab has cured, switch to the 18 in walk-behind.

Grinding, leveling or stripping a floor

The EDCO Turbo-Lite TL-9 (9 in, 94 lb, 115V) and the heavier single-disc grinder knock down high spots and take off thin coatings and glue. For thick coatings, paint lines or leveling a trip hazard, the gas CPM-8G Crete Planer chips the surface about 1/8 in per pass and belongs outdoors. The TS-8 Tile Shark lifts tile, sheet vinyl and glued carpet; it does not grind. Run the EDCO industrial vacuum with any electric grinder indoors.

Breaking, drilling, mixing and moving

The Hilti TE 3000-AVR (59.7 lb, 62.7 ft-lb per blow) is the floor breaker for slabs, footings and steps; the Hilti TE 70-ATC/AVR (22 lb) drills anchor and through-wall holes and chisels light patches but will not break out a slab. The Whiteman MC12PH mixes 12 cu ft (1.5 to 2 bags) per batch and tows to the job. To move it, the Whiteman wheel buggy carries 16 cu ft on firm ground; the Canycom SC75 track buggy carries 2,200 lb across mud, slopes and lawns.

Questions about renting concrete & masonry

How long can I keep a saw, grinder or hammer?

Most items here rent by the rental period: 1 to 4 hours, 4.5 to 24 hours, 1 week or 4 weeks. The two power buggies rent by 1 to 24 hours, 1 week or 4 weeks. You pay for the time it is out, not run time, and there is no hour-meter billing.

Can you deliver to the job?

Yes. Ward's own crew delivers and picks up 7 days a week. Round-trip delivery for most of this equipment is $85 within 1 to 45 minutes' drive of the Hamburg yard and $125 for 46 to 75 minutes; farther out is quoted individually. You can also pick up at 6472 E M-36, Hamburg.

Which blade comes with the saw?

Tell us what you are cutting when you book (concrete, asphalt, pavers, block or tile) and the saw goes out with the right blade. If a blade wears out during the job, call or text 810-231-7368 as soon as possible.

What do I rent to cut pavers or tile?

For a paver patio, the DeWalt 10 in brick and paver saw cuts wet on a stand (3-1/8 in max depth), and the STIHL TS420 is faster for curves and cuts made in place. For ceramic, porcelain or stone tile, rent the DeWalt 10 in wet tile saw.

Do I need water or power on site?

The 18 in walk-behind saw and both DeWalt saws cut with water, so plan on a garden hose. The grinders, Tile Shark, vacuum and Hilti hammers run on a standard 120V outlet; the TL-9 needs a 15A circuit. The CPM-8G planer, mixer, buggies, STIHL saw and early-entry saw are gas, billed at our cost with no markup.

Can I run concrete equipment indoors?

The electric grinders, Tile Shark and Hilti hammers can run indoors; pair the grinders with the EDCO industrial vacuum because concrete dust contains silica and a shop vac cannot keep up. The gas CPM-8G planer is for outdoor or well-ventilated work only.

Ready to rent?

Request online and we will confirm availability and delivery, or call or text 810-231-7368.