Text us at (810) 231-7368
Send a text from your phone, or open your computer's messaging app.
Menu
Not sure what you need? Our team can help.
Hamburg, Michigan • Serving Southeast MichiganMini excavators, tracked and wheeled skid steers, the stand-on MT100, the attachments that run on them, plus a trencher, plate compactor and ride-on roller. For digging, grading, clearing and compacting on contractor and homeowner jobs.
The smallest excavator we rent: retracts to 28 in to fit a doorway or gate and digs 6 ft. Pick it when the E35 will not fit.
Mid-size excavator: digs about 10 ft, fits a 6-ft gate, zero tail swing. The usual pick for footings, sewer lines and stumps.
Starting at $260 for up to 4 hours
The biggest mini excavator we rent: more reach, lift and bucket force than the E35 for deep digs, heavy pipe and truck loading.
Starting at $310 for up to 4 hours
Tracked 74 hp loader with 2,450 lb rated capacity. Steady on soft ground and runs every full-size attachment we carry.
Tracked 68 hp loader in the same class as the T66-2, with a wide sliding cab door. Note: our soil conditioner does not fit it.
Starting at $260 for up to 4 hours
Wheeled 61 hp loader for pavement, gravel and firm ground. Faster on hard surfaces; choose a tracked machine for mud or lawns.
The wheeled S570 paired with a hydraulic auger (first bit included) for fence posts and footings on firm, dry ground.
Starting at $285 for up to 4 hours
The tracked T66-2 paired with a hydraulic auger (first bit included) for long fence runs and footings on soft ground or lawns.
Stand-on track loader 35.6 in wide, so it fits a 36-in gate. Carries 1,000 lb per load and takes our stand-on attachments.
Starting at $200 for up to 4 hours
The MT100 stand-on loader paired with a hydraulic auger (first bit included) for post holes in fenced backyards.
Walk-behind tracked trencher that cuts a 6-in wide, 36-in deep trench for water, electric, irrigation and drain lines.
Starting at $175 for up to 4 hours
Walk-behind plate compactor for packing gravel base and setting pavers; the compaction tool for patios, walks and small slabs.
Starting at $55 for up to 4 hours
Ride-on roller with two 36-in vibratory drums for asphalt and gravel base over bigger areas than a plate compactor covers.
Starting at $250 for up to 4 hours
72-in hydraulic-angle soil conditioner that tills, rakes and levels in one pass. Fits the T66-2 and S570, not the Kubota.
Starting at $300 for up to 24 hours
66-in root grapple for full-size skid steers; open tines hold brush, roots and logs while the dirt falls through.
Starting at $250 for up to 4 hours
48-in pallet forks that turn a full-size skid steer into a rough-terrain forklift for pallets of block, pavers, sod and lumber.
Starting at $35 for up to 24 hours
Hydraulic post hole auger drive rented without a machine, for customers who own a skid steer with auxiliary hydraulics.
Starting at $90 for up to 4 hours
Hydraulic breaker for full-size skid steers: slabs, footings, sidewalks and rock, with the operator in the cab instead of on a jackhammer.
Starting at $200 for up to 24 hours
48-in soil conditioner for the MT100: breaks up and levels backyard topsoil for seed or sod where a 72-in unit will not fit.
Starting at $300 for up to 24 hours
36-in root grapple sized for the MT100, for clearing brush, roots and debris from yards a full-size machine cannot reach.
Starting at $200 for up to 24 hours
42-in pallet forks for the MT100 stand-on loader: carry pallets of pavers, block and sod through a backyard gate.
Starting at $35 for up to 24 hours
Hydraulic post hole auger for the MT100 stand-on loader (first bit included), for fence and deck footings in tight yards.
Starting at $150 for up to 24 hours
Digging below grade (footings, trenches, stumps, sewer and water lines) is excavator work: the Bobcat E10, E35 and E48 dig 6 ft, about 10 ft and 10 ft 4 in. Moving and shaping material on the surface (gravel, topsoil, grading, pallets) is loader work: the Bobcat T66-2 and Kubota SVL65-2 carry 2,450 lb and 2,100 lb per bucket. The stand-on Bobcat MT100 is the loader for yards behind a 36-inch gate.
The T66-2 and SVL65-2 run on rubber tracks that spread the weight, so they stay put on wet spring ground and are gentle on lawns. The wheeled Bobcat S570 is quicker on pavement, gravel and firm ground, but it ruts turf and gets stuck in mud. If the site is soft or you are crossing a lawn, take a tracked machine.
The E10 retracts to 28 in, the MT100 is 35.6 in wide and the walk-behind trencher is 35.8 in, so all three clear a standard 36-inch gate. The E35 (69.7 in), T66-2 (67.8 in), SVL65-2 (68 in with bucket) and E48 (72.8 in) all need roughly a 6-ft opening.
Forks carry pallets, a root grapple grabs brush and roots, a soil conditioner tills and levels a seedbed, a breaker takes out concrete and a post hole auger drills footings. Full-size attachments fit the T66-2 and S570 (the soil conditioner does not fit the Kubota); the stand-on versions fit only the MT100. Attachments rented with one of our skid steers are half price.
Helpful guides: Skid steer or mini excavator? ยท How deep can a mini excavator dig? ยท Backyard access for rental equipment ยท Paver patio equipment guide
The Bobcat E10 mini excavator retracts to 28 in, the Bobcat MT100 stand-on loader is 35.6 in wide and the walk-behind trencher is 35.8 in, so each fits a standard 36-inch gate. The E35, E48, T66-2, SVL65-2 and S570 are 67 to 73 in wide and need about a 6-ft opening.
Round-trip delivery on our own trucks runs $85 within 1 to 45 minutes of the Hamburg yard and $125 for 46 to 75 minutes for mini excavators, skid steers and most equipment. Dual-machine loads are $125 and $200. Past 75 minutes we quote individually. We deliver and pick up 7 days a week.
Yes. The mini excavators and full-size skid steers ride on our 16 ft trailer with a 2 5/16 in ball and need a 3/4-ton truck or larger (the E48 weighs close to 10,000 lb and takes a heavy-duty truck). The MT100 rides on a 6x12 trailer with a 2 in ball and the trencher on a 5x10 utility trailer with a 2 in ball. We confirm your tow setup at the counter.
Yes. Call 811 at least three business days before digging, trenching or augering so underground utilities are marked.
No. You pay for the rental period the machine is out, including weekends and holidays, not hours on the meter. Fuel is billed at our cost with no markup.
A valid driver's license and a major credit or debit card in the same name; prepaid and reloadable cards are not accepted. An optional damage waiver is available and must be added before the rental starts.
Request online and we will confirm availability and delivery, or call or text 810-231-7368.
